Teachers.Net
JoinLog in
Teachers.Net

Fractional Distillation

By Dave Lane

  • Science
  • Middle
Activity Time
10 minutes
Materials
alcohol, water, glycerol, good quality (pyrex) test-tube, Bunsen burner, test-tube clamp.
Concepts / Topics
Separation of substances using differences in boiling point

The teacher demonstrates heating a mixture of water, alcohol, and glycerol, observing their differing boiling behavior and the liquids' flammability.

Because of the difficulties and risks associated with the fractional distillation of mineral oil mixtures, I concocted the following procedure as a simple introductory demonstration before proceeding to fractional distillation of the same mixture using standard quick-fit apparatus.

Preliminary Discussion and Demonstration

  • Explain (or demonstrate) that alcohol and glycerol will burn—for example, using a small amount on glass wool held over the Bunsen burner.
  • Note (or demonstrate) that the three liquids have different boiling points.

The Demonstration

  1. Mix small (>10 mL) equal quantities of the three liquids (water, alcohol, glycerol) in a test-tube.
  2. Heat over the Bunsen burner. Ignite the alcohol as the mixture begins to boil. (Take care!)
  3. Continue heating. The alcohol flame extinguishes as the mixture continues to boil and steam is produced.
  4. Continue heating. The glycerol now ignites. Allow it to burn for a few seconds, then extinguish the flame by covering the mouth of the test-tube with card. Set aside to cool. Turn off the Bunsen burner.

Hints and Preparation

The flame produced is affected by the rate of heating. Adjust accordingly. This is a demonstration that must be rehearsed. Workplace Health & Safety/Risk Analysis should be completed beforehand.

Teachers.Net · https://teachers.net/lessons/2388.html