Surface to Volume Ratios
- Science
- Senior

- Activity Time
- Materials
- Concepts / Topics
Learners expose agar blocks to acid, measure penetration and elapsed time, calculate diffusion rates and surface-area-to-volume ratios, and relate the data to cellular transport.
Cell Size: Surface to Volume Ratios
Chapter 5: Cell Structure and Function
Purpose
The purpose of this laboratory experiment is to measure the rate of diffusion in agar and to calculate the surface area to volume ratios of varying cell sizes.
Background Information
In this lab you will construct a simple model that will allow you to examine the relationship between cell structure and cell function. The structure of a cell relates to its function. The difference in the structure of a nerve cell and a skin cell, for example, reflects the difference in their functions.
Increasing cell size affects passive diffusion—the movement of small molecules across the cell membrane from regions of higher concentration to regions of lower concentration. In this lab, you will see how increasing cell size imposes certain restrictions on passive diffusion. This will be accomplished by modeling the relationship between diffusion and the ratio of a cell's surface area to its volume.
Materials
- Surgical gloves
- Agar block containing phenolphthalein
- Plastic spatula or spoon
- Glass plate
- Metric ruler
- Scalpel or single-edge razor blade
- 250-mL beaker
- 100 mL 0.2 hydrochloric acid
- 4–6 sheets of white paper
Procedure
Latex gloves should be worn at all times during this laboratory activity.
- Note the diagram showing how to cut the agar blocks. Use a spatula or a spoon to place the blocks on a glass plate. Cut the agar block as shown. Clear the cutting procedure with your teacher BEFORE YOU START. It is imperative that you do not touch the blocks with bare hands.
- CAREFULLY place all four blocks into the beaker. Make sure that none of the edges touch. Add enough dilute hydrochloric acid to cover the cubes completely. Why is it necessary that none of the edges of the blocks are nicked or damaged? How would this skew your results?
- Record the exact time on a piece of paper.
- Gently lift each block to be sure that all surfaces contact the acid. Gently swirl the beaker occasionally to promote contact with fresh acid.
- At your teacher's instruction, carefully lift out Block 4. Place the block on a white sheet of paper for color comparison.
- Record the time on a sheet of paper.
- Cut Block 4 down the center with the CLEANED razor blade or scalpel. Work quickly but carefully. After the cut, clean the razor blade or scalpel.
- Repeat steps 5 and 7 for each of the remaining blocks, from smallest to largest. Why is it necessary to remove the blocks in this specific order?
- Measure in millimeters the distance the acid has penetrated into each block, and record it on the Class Data Chart. Is the distance the same from all edges of the same block?
- Record the elapsed time in minutes on the Class Data Chart.
- Calculate the rate of diffusion as millimeters per minute and record it on the Calculation Sheet. Add your data to the Class Data Chart and record the data from the other teams on your chart.
Data and Observations
See the Class Data Chart and Calculation Sheet.
Questions and Conclusions
Answer the following questions from the procedure using complete sentences, proper grammar, and scientific terms.
- Why is it necessary that none of the edges of the blocks are nicked or damaged? How would this skew your results?
- Why is it necessary to remove the blocks in this specific order?
- Is the distance the same from all edges of the same block?
Answer the following questions using complete sentences, proper grammar, and scientific terms.
- What was the average rate of diffusion for each block?
- According to your data, how does the surface area-to-volume ratio relate to the rate of diffusion?
- Using the distance that the acid traveled into the cube, calculate the percentage of the volume of Blocks 1 and 2 that exhibited diffusion. Accomplish this by calculating the volume where the acid did not reach, and subtract that from the total volume.
- If a cell has a small surface area-to-volume ratio, how well do you think molecules can pass in and out of it? Relate this to respiration and excretion at the cellular level.
Class Data Chart
Class Data: Rate of Diffusion
| Team | Block 1: Distance (mm) | Block 1: Time (min) | Block 1: Rate (mm/min) | Block 2: Distance (mm) | Block 2: Time (min) | Block 2: Rate (mm/min) | Block 3: Distance (mm) | Block 3: Time (min) | Block 3: Rate (mm/min) | Block 4: Distance (mm) | Block 4: Time (min) | Block 4: Rate (mm/min) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | ||||||||||||
| B | ||||||||||||
| C | ||||||||||||
| D | ||||||||||||
| E | ||||||||||||
| F | ||||||||||||
| G | ||||||||||||
| H |
Surface Area / Volume Ratio
| Block | Length | Width | Height | Surface Area | Volume | Ratio |
|---|---|---|---|---|---|---|
| Block 1 | 30 mm | |||||
| Block 2 | 20 mm | |||||
| Block 3 | 10 mm | |||||
| Block 4 | 5 mm |
Calculation Sheet
Use the following equations to help with your laboratory exercise. Show the mathematical work for at least ONE of each of the types of calculations.
Surface Area = 6 x L X W X H Volume = L X W X H Ratio = Surface Area / Volume % of diffusion = total volume - volume not reached by acid
Use the space below for your calculations.
Teacher Notes and Preparation Information
The Agar Blocks
Homogenization Medium
- 30 mL liquid dish soap or shampoo
- 8.8 g sodium chloride
- 4.4 g sodium citrate
- 0.3 g EDTA
- 1 L distilled water
Place the ethanol in a freezer overnight in a bottle that is not completely full, with a loose cap.
The materials list below is enough for a class of 30 students.
- Homogenization medium
- Blender
- Boiling water bath
- 95–100% ethanol
- 60 latex gloves
- 15 medium-sized onions
- 15 cutting boards and scalpels
- 30 250-mL beakers
- 15 metric rulers
- Ice bucket
- 1 package of cheesecloth
- 60 10-mL test tubes
- 30 glass stirring rods
- 15 grease pencils
- 15 stopwatches
Teachers.Net · https://teachers.net/lessons/2518.html