Teachers.Net
JoinLog in
Teachers.Net

Stained Glass Heart Suncatcher

By Alison Morris

  • Art
  • Middle
Activity Time
Three classroom sessions
Concepts / Topics
Students will learn the importance of color and light

Objectives

  1. Students will learn the basics of stained glass, including glass cutting, assembly, soldering, and finishing.
  2. Students will improve hand dexterity, attention to detail, and craftsmanship.
  3. Students will learn the importance of color and light, as sunlight changes the appearance of the colored glass and creates a rainbow through the bevel.

Grade Levels

Middle School, High School

Time Required

Three sessions

Materials for 12 Projects

QuantityItem NumberDescription
12#52641½ Square Bevels
2 small#S152RRSpectrum Red Rough Rolled Glass
2 small#S134RRSpectrum Blue Rough Rolled Glass
2 small#S20091WSpectrum White Waterglass
2#55717/32 Silver Back Foil
2#3000Mastercraft Solder (for lead-free, use #2999)
1#5607Bag of Hooks
1#5521Gel Flux

Teacher’s note: Cut each small sheet of glass into six pieces, creating 4-inch square pieces of glass for each student. Experiment with different colors of glass. If creating hearts that are one color (for example, all red for a Valentine’s Day project), use 4 small sheets of glass, with each student receiving 1/3 of a sheet.

Additional Supplies

See the Basic Supplies List on Delphi’s Beginning Stained Glass Instructions sheet, included below.

Directions

Refer to Delphi’s Beginning Stained Glass Instructions for detailed directions.

  1. Cut the easiest piece first. The pieces are numbered from the easiest (#1 is a bevel—no cutting required) to the most difficult (pieces 4 and 5).
  2. On pieces 4 and 5, cut the curved side first.
  3. Grind or use a scythe stone to remove burrs.
  4. Foil.
  5. Solder, including the hook onto the top of the heart.
  6. Clean and polish.

Basic Types of Glass

  • Cathedral: Clear or colored glass that you can see through.
  • Wispy/Translucent: Clear glass with opal streaks.
  • Opal: Glass that allows light through but cannot be seen through.

Cutting and Breaking Glass

Scoring

A score is a light, continuous scratch on the glass surface, extending from one edge of the glass to the other.

  • A good score should look like a hair on the glass; a string is too heavy. A good score has no breaks or gaps in it.
  • Heavy pressure is not required and can cause a poor break of the glass.

Cutting

Hold the cutter as you would a pen or pencil. Don’t tilt it from side to side; keep the wheel perpendicular to the piece of glass. Drag your hand as you score to control the motion. Steer from the elbow and shoulder; your wrist should remain motionless. Stand rather than sit while cutting.

  1. You can either push or pull the cutter. To cut straight lines, pull; for shaped pieces, push so that you can see where the pattern lines are located.
  2. Always score the glass on the shiniest or smoothest side.
  3. Make only one score at a time. Break the glass, then make the next score.
  4. Avoid running your score lines less than ½ inch from the side of the glass.
  5. Never back up or re-score the same line.
  6. Always number your glass pieces.

Special Cuts

Inside curves or tapered cuts:

  1. Score inside curves first.
  2. Score the outside curve; pinch the tip of the glass while breaking with running pliers.

Contour cut: Use when breaking out a curved area too tight to break out with running pliers, or when other methods of breaking fail.

  1. Score along the pattern line.
  2. Make a series of scores parallel to the original pattern line, 1/8–1/4 inch apart.
  3. Using breaker/grozers, break out parallel scores one at a time, working toward the pattern line.

Breaking

  1. Two-fisted grip: With hands in tight fists, place fingers together on the bottom side of the glass, with the score line running between your fingers. Place thumbs on the top surface of the glass, slightly apart, one on each side of the score. Press down with your thumbs and up with your fingers to snap the glass along the score line.
  2. Running pliers have a curved jaw that allows for more control when making long or more difficult breaks. Line up the score with the indicator line on the upper jaw, placing the pliers ¼–½ inch over the glass edge. Gently clamp down on the glass. Turn the set screw until you feel it just touch the glass, then back off the set screw slightly and squeeze.
  3. Breaker/grozer pliers are used for removing pieces of glass too small for hands or running pliers. They have a curved lower jaw and a flat upper jaw, both with a serrated inner surface. Place the pliers approximately 1/16 inch in from the glass, parallel to the score line, with the flat jaw on top. Use your other hand while applying the two-fisted grip described earlier, and bend the pliers down and away from the score.
  4. Grozing is the removal of flares, nibs, and small pieces from the glass edge. Using one hand to hold the glass, roll the serrated surface of the breaker/grozer pliers over the edge, removing unwanted glass. Grozing allows you to clean the glass edge for safer handling and easier foiling, as well as a better fit.
  5. Grinders: Many types of grinders are available for quick and accurate trimming of cut pieces.

Constructing Piece Patterns for Opaque Glass

There are two methods of making piece patterns.

  1. Layer the following 5 items: original pattern, carbon paper, cutting or layout pattern, carbon paper, and piece pattern (tag board, vellum, or Mylar).
  2. Trace over the original pattern using a pen or pencil. Make sure to trace all lines.
  3. Number all pieces; designate color and direction if desired.
  4. Separate copies.
  5. Cut out the piece pattern using foil pattern shears. Outside edges can be cut with regular shears.
  6. Place the pattern piece on the glass and trace around it using a permanent marker. If using a side other than the smooth side of the glass, turn the pattern piece over.
  7. When scoring glass, cut on the inside of the drawn line so that the line is on the waste portion of the glass.

Foiling

Foil comes in assorted widths, thicknesses, and backing colors, such as silver, black, or copper. Selection depends on glass type and any effects you may be looking for.

Beginners should start with easy-to-handle 7/32-inch, 1.5 ml thick foil.

  1. Peel back 2–3 inches of backing from the foil. Hold the glass with the edge toward you, and apply foil to the glass so that it extends evenly over both sides. Crimp (fold) over the edges, making sure to fold corners neatly and flat.
  2. Burnish foil using a fid or similar tool. Press foil flat against the glass on the outside edge first, then on both sides of the glass. Don’t scrub, as you may rip the foil.
  3. Lay the foiled piece over the corresponding piece on the working pattern.

Soldering Safety

No drinking, eating, or smoking while handling lead or solder! Pregnant and lactating women should avoid all soldering.

Solder Types

Solder is a mix of tin and lead in different proportions. Only use solid-core types.

  • 50/50 can be used for the foil method and lamps.
  • 60/40 is best for either foil or lead.
  • 63/37 can be used for decorative work.
  • Use lead-free solder when projects will be handled—kaleidoscopes, jewelry boxes, or objects for young children.

Soldering a Panel

  1. Realign pieces on the pattern. Use push pins or layout blocks to hold them together.
  2. Apply flux to copper-foiled pieces.
  3. Tack solder at seam intersections by holding the iron above the panel and allowing solder to drop onto the panel.
  4. Completely solder seams by holding the iron tip on the foil, perpendicular to the seam. Hold the iron as you would a carving knife. Feed the solder into the tip as you move along the foil. Stop soldering ¼ inch from the panel edge on all seams if you are putting a came edge on your panel.
  5. Allow the panel to cool, then flip, flux, and solder all seams as on the front. It is not necessary to tack solder the back. Be careful when flipping the panel over; any straight edges or seams can act as a hinge and pull foil away from the glass.
  6. Apply edge came.
  7. When the front and back are completely soldered, wash thoroughly using warm water and soap (such as CJ’s Flux Remover #5514) and a soft brush. Clean both sides, then rinse well and dry.

Soldering Tips

  1. If solder doesn’t flow smoothly, apply more flux.
  2. If seams bulge over the glass, there’s too much solder. You may need to melt off the excess.
  3. If solder spits or bubbles, there’s too much flux; wipe some off.
  4. Flat seams need more solder.
  5. Don’t stay in the same spot too long, or the solder will bleed through or the glass will crack.
  6. Wipe your iron tip frequently on a wet sponge while soldering.
  7. Re-tin your tips as needed using a sal-ammoniac block.

Framing

Came

Came is used for edging your panel. Types include zinc, brass, copper, and lead. Lead needs to be stretched before use.

  1. Fit the side cames to your panel first, having them extend beyond and overlap the top and bottom of the panel. Then fit the top and bottom cames within the side cames. This will leave the top of the side cames open for the rings. Solder the corners and all seams where they meet the came.
  2. Place a ring over the opening at the top edge of the zinc. Flux and solder the ring securely.
  3. Clean your panel with flux remover, then dry.
  4. Lead came can be used for oval or round frames, but remember to stretch it first. A came bender can be used to bend zinc, copper, or brass.

Wood

Frame your panel with zinc or lead first. A wood frame is optional. Silicone or glazier points can be used to secure the panel to the frame.

Patina

Patina is a chemical used to change the color of soldered seams to black or copper.

Make sure your panel is completely cleaned before applying patina. With latex gloves, apply patina to soldered seams using a small brush, a cotton rag, or a paper towel; add patina as needed. Patina the front and back of the panel, then rinse clean.

Finishing

Apply a wax coating to help keep your panel from oxidizing. Hang your panel with a chain that will support its weight.

Basic Supplies List

Listed with Delphi item numbers for easy reference.

  • #5066 Breaker/Grozer Pliers
  • #5068 Running Pliers
  • #5104 Glass Cutter
  • #5163 Safety Glasses
  • #5013M Iron Stand
  • #5500 Flux
  • #5141 Flux Brush
  • #5561 Copper Foil
  • #5002 Soldering Iron
  • #3000 60/40 Solder
  • #5169 Scythe Stone
  • #5514 Flux Remover
  • #5511 Black Patina
  • #5165 Corkbacked Ruler
  • #5086 Foil Shears

Additional Instructional Resources

For more stained glass instruction, see these Delphi best sellers!

Quick Success Stained Glass #6186

Over 100 color photos of glass, tools, projects, and techniques to get the beginner started quickly. Includes 18 full-size patterns for the first-timer!

Stained Glass Basics #6405

A step-by-step instruction book for all skill levels. Features copper foil, overlays, lead came, 3-D, panel lamps, and repairs. Includes inspirational color photos and technical tips.

Delphi Made Easy Videos

Stained Glass Made Easy #6149V: This video guides the beginner step by step through a simple but elegant window project. All the copper foil basics are covered, including cutting, foiling, soldering, patinas, and framing. This updated tape provides the how-to information and confidence you need to create your first stained glass window. Includes a pattern.

Soldering Made Easy #6151V: This video is loaded with useful tips, tricks, and advice for beginners and intermediate crafters. Learn techniques to smooth rough solder lines and beautify your work!

Glossary of Terms

Cutter: A tool consisting of a handle and a beveled cutting wheel. The wheel may be constructed of either steel or tungsten carbide and rotates freely on its axis.

Cutting Oil: A high-viscosity fluid used in conjunction with glass cutters. Oil keeps the wheel clean of dust and glass chips, which increases the life of the cutter.

Score Line: When the cutter is pressed against the glass and then drawn or pushed across the surface, it makes a score line, which resembles a light scratch on the surface of the glass.

Run: Glass does not break in half like a loaf of French bread. Rather, it begins to break at the edge of the glass and then runs to the other edge, completing the break. The special pliers used to control the process are called running pliers.

Break: Essentially the same thing as a “run,” only it occurs so fast that the glass appears to break apart all at once. Breaking pliers are designed to enable you to hold small pieces of glass during the breaking process.

Groze: The process of filing or chipping away small pieces of glass. Pliers with small serrated teeth are used for this process, and they are called grozing pliers.

Grind: A grinder is an electric tool used for the precision shaping of glass. Glass pieces are laid flat on the work surface and pressed against a rotating diamond-coated bit to remove glass in very controlled amounts. This is called grinding.

Copper Foil: Essentially copper tape, it comes in different widths and thicknesses. It is wrapped around the outside of a piece of glass and then pressed into place along the sides. Solder will stick to the copper foil but not to the glass during the assembly process.

Flux: Either a paste or a liquid used in the soldering process to clean the metal surfaces. It is applied to either copper foil or lead came just prior to soldering.

Solder: Solder for stained glass comes in a few types, with 60/40 and 50/50 being the most common. These numbers express the tin-to-lead ratio. 60/40 melts at 370°F; 50/50 at 414°F. There is little real difference in the strength and flexibility of these solders, and which one you use is a matter of personal preference. Rosin-core solders are not acceptable for stained glass work. Lead-free solder is another option.

Tinning: Applying a thin layer of solder to a metal surface, usually copper foil, to prevent oxidation.

Burnishing: The process of pressing foil against the sides of the glass.

Lead Came: A thin strip of metal with a channel grooved into it to receive pieces of glass. Came is cut to the size of the glass pieces, and each piece is soldered into place at the point where it intersects another piece of came.

Zinc: A preformed metal strip much the same as lead came, but far stronger. It is generally used for the initial framing of panels.

Patinas: Chemical solutions applied to solder seams to alter their coloration.

How to Teach Glass Cutting Skills

Use this exercise to practice and learn proper glass cutting techniques.

Materials

  • #M3901 Double Strength Clear Glass—medium pieces (cut into ½ sheet per student)
  • #5102 Fletcher Terry Cutter or #5104 Dry Wheel Super Cutter
  • #5066 Breaker/Grozer Pliers
  • #5068 Running Pliers
  • #5163 Safety Glasses

Hand Tools

Emphasize how and when to use each hand tool.

Cutters

  • Show the different kinds of cutters available and encourage students to try each kind before purchasing one. Discuss some of the differences. Pencil grips require finger strength; the pistol grip uses more hand strength.
  • Point out that cutter heads are made to move. The movement allows the student to feel the curve that may be on the glass.
  • To keep your cutter in the best condition, occasionally lubricate the wheel with cutting fluid. This will keep the wheel rolling smoothly, which will make your glass scores consistently better.
  • If using a cutter with an oil reservoir, use only a small amount of oil. Too much oil will make it leak onto the glass. If you lubricate the wheel, it is not necessary to fill the reservoir.

Running Pliers

  • Spend time looking at the tools before using them. Ask students to look at the running pliers and tell you what they notice. They have coated tips that are used on glass. These tips are important to successful breaking of the glass. There is a small screw on the top side that must be adjusted to the thickness of the glass. Each type of glass varies in thickness.
  • To determine the setting for the glass, put the piece of glass in the pliers. Carefully turn the screw until its end touches the inside of the other handle, then back off 1/4 turn. Check the setting each time you change the type of glass being cut. Looking straight at the end of the pliers, you can see that they curve down.
  • When using running pliers, the screw must face up. The pliers have a center mark that must be lined up with the score. It should look like the score continues up onto the pliers. Apply light pressure to the glass. The score will start to run and then break apart.
  • Emphasize that glass does not like to be “strong-armed.” Students will be more successful if they are gentle.

Breaker/Grozer Pliers

  • Notice that the jaws of the pliers are different. One jaw is flat and the other is curved. This difference allows the pliers to be used in two ways.
  • Curved jaw on top: The grozing jaw is used to nibble away at the edge of the glass. This is useful when a little burr or shard protrudes from the edge.
  • Flat jaw on top: The breaking jaw is used to “break” or “snap” the glass at the score line. Position the flat jaw near the score line and hold the other side with your hand; break the glass using a downward motion.

Scoring and Cutting Glass

  • Don’t focus on making straight cuts. Allow students to become familiar with the tools and how they work.
  • When choosing which side of the glass to score, look for the shiny side. If there is no shiny side, choose the smooth side.
  • When making a score, the wheel should be perpendicular to the glass.
  • Three to five (3–5) pounds of pressure are needed to score the glass. When the tip is pushed, that is all the pressure that is needed.
  • A score should look like a strand of hair, not grains of sand.
  • You are only required to break the surface tension. When the surface tension is broken, the glass will run.
  • Provide the student with a very simple pattern. The source refers to an attached practice sheet.

Using the Practice Sheet

  • Start the score at the edge of the piece of glass and stop at another edge.
  • Do not stop in the middle of a piece of glass or make a score that turns a corner. Allow students to attempt the first score (#1 on the practice sheet). This score divides the glass into 1/3 on one side and 2/3 on the other. Set the large piece to the side. Students have now used the cutter and the running pliers. Running pliers can be used when ¾ of the tip will fit on the glass.
  • Allow students to attempt the second score (#2 on the practice sheet). Show them that the running pliers do not fit on the glass. Then demonstrate the use of the breaker/grozers. Tell students to place the breaker/grozers next to the score, but not on it. Gently apply slight downward pressure while moving the breaker/grozers from one end of the score to the other. Show students how to drop their elbows slightly as they use the breaker/grozers. Tell them that as the run continues, it will break off. They may have to apply the breaker/grozers several times before the glass breaks.
  • Explain that glass likes to break straight. You can coax it to make gentle curves. Notice that there is about ¾ inch from the top and bottom edge. That adds support to the score.
  • Allow students to attempt the third score. Tell them to apply light pressure to one end. When they hear a crack, turn and go to the other end of the score and do the same thing. As the two runs meet, the glass will break. Explain that the longer the score, the more important it is to apply gentle pressure to one end and then to the other. It may be necessary to go back and forth a few times.
  • Allow students to do another score the same way by scoring #4 on the practice sheet.
  • Allow students to score #5. Explain that this is the hardest break to achieve. Remember that inside curves are done first, and students should put as much glass as possible around the curve for support and strength. Using the practice sheet, show them that there is about ¾–1 inch on each side of the curve at the bottom of the glass. There is about 5 inches above the score. That is the secret: strength on three sides.
  • Tell students that they will have to stand to make the score. When they stand, they can shift their body weight to make the score in one continuous motion. Have them do an imaginary score in front of them to see if they have room to complete it. Then make the actual score.
  • Using the running pliers, apply gentle pressure to the score. When students hear a crack, go to the other end and do the same thing. Be gentle. Go back and forth, and it will come out.
  • To show students another method of making inside curves, direct them to score #6. It is preferable that they have a rectangular shape. Show them how to make small arches and use the breakers to pull them out. Apply the breakers next to the score, not on it, and pull. Pull straight out from in front of you to the side of you. You have to try this. I am successful if I pull an arch that is less than ¼ inch at the top.

Some pictures, including the heart pattern, did not paste into this lesson plan. The source directs readers to www.delphiglass.com/teach or info@delphiglass.com to find them.

Teachers.Net · https://teachers.net/lessons/2931.html