Engineering Drafting
- Career Technical Education
- Mathematics
- Senior

Students learn geometric tolerances and dimensioning techniques, then work in groups to design assigned parts using CAD; printed drawings are reviewed for fit or critiqued by an engineer.
Concepts to Be Taught
Cooperative learning and geometric tolerances.
Instructional Techniques
I like to place students in groups with people they are not always familiar with. I distribute students according to ability, placing stronger students in each group so that no group has an unfair advantage over another.
Objectives
Each student will learn what geometric tolerances are and how to apply them to geometric designs.
Time Requirements
Approximately one week, assuming block scheduling with three 1.5-hour blocks.
Tools and Equipment
- Calipers
- 3D geometric parts or drawings of parts
- Computers
- CAD software
Supplies and Materials
Please feel free to contact me for materials at the address or phone number listed in the abstract.
Teacher Presentation and Student Activities
Day 1
Arrange for a guest speaker from industry to talk about the importance of tolerances in manufactured parts (45 minutes).
Teach students how to apply tolerances to parts using dimensioning techniques. Assign students to groups and hand out the drawings of the part that each group is to construct using the computer and CAD software. Students may begin the design phase if time permits (45 minutes).
Day 2
Reteach tolerance applications or answer any questions pertaining to tolerancing. Have students begin or continue working on the design of each part they were given. Remind students that their projects will be due at the end of the next block.
Day 3
Once again, remind students that their projects will be due at the end of this block. Answer any questions they may have and monitor their progress throughout the block. Collect their work at the end of the block, after it has been printed out in hard copy.
References and Text
There are no specific references or required texts. There are many ideas for problems in drafting books. Once again, please contact me for further information.
Interdisciplinary Linkage
This lesson applies to math and business areas. Students may opt to “job shadow” an engineer in one of their Basic Skills Technology (BST) classes.
Evaluation Strategies
Evaluation of this project can be done in a number of ways:
- Have the entire group come together and look the drawings over to see if the parts will “fit” with each other.
- Ask a fabrication shop to build the parts and bring them back to the classroom to physically show students how well their parts fit or did not fit together.
- Ask an engineer to look the drawings over and critique them.
Common Problems
- Keeping students on task
- Problems with the computers or CAD usage
- Problems with output
Attachments
Please contact me for materials.
Teachers.Net · https://teachers.net/lessons/3268.html