Types of Chemical Equations - Handout
- Science
- Senior

- Activity Time
- Concepts / Topics
Types of Chemical Equations
Equations in chemistry consist of two major divisions: the reactants side and the products side. The reactants (the elements and compounds that are reacting) are written symbolically on the left, and the products (the results of the reaction) are written on the right:
A + B ----> C + D
A and B are reactants; C and D are products. The equation is read, “A reacts with B to yield C and D.” The arrow is read as “yield” or “yields.”
Also, when writing the reactants and products, other symbols are used to indicate what kind of reactants and products are being used and being formed (whether they are solid, liquid or gaseous). An up-pointing arrow means a gas is being formed and a down-pointing arrow means a precipitate (a solid) is being formed.
A(s) + B(l) ----> C(g) + D(s) + E(aq)
This means that a solid element or compound A is reacting with liquid phase B to yield gaseous element or compound C plus solid D and element or compound E which is dissolved in water ('aq' means aqueous, or in water).
Writing and Balancing Equations
Equations must represent the facts of the chemical reaction, all elements and compounds must be written correctly and the equation must be balanced to satisfy the Law of Conservation of Atoms. No mass is gained or lost in a chemical reaction. The total mass of reactants equals the total mass of the products. Until an equation is balanced, it does not truly represent a chemical reaction.
To write an equation:
- Represent the facts.
- Write correctly the formulae of all elements and compounds involved.
- Balance the equation so that equal numbers of each type of atom are present on each side.
You might want to write the equation in words and translate the words to symbols, if it is not already in symbolic form, then proceed as indicated above.
KEEP IN MIND THAT THERE ARE SEVEN DIATOMIC GASES WHOSE FORMULAE ARE NOT WHAT THEY WOULD BE IF WRITTEN STRAIGHT FROM THE PERIODIC TABLE.
To write equations correctly, you must know the symbols and usual oxidation numbers of the elements, as well as the radicals, their charges, and their names. You must know what is reacting and forming, and whether each substance is a gas, liquid, solid, or dissolved in water. Make sure compound formulae are written correctly, and balance the equation so that equal numbers of each type of atom appear on both sides.
Use coefficients only in front of the symbols of the elements and compounds involved in the reaction. Never change the formula of a compound or element to balance an equation. Doing so changes the identity and the physical and chemical properties of the substance. For example, if iron(II) oxide were reacting and you wrote the symbols for iron(III) oxide, you would not be representing the facts, and the equation would be inaccurate.
You must represent the formulae for all reactants and products correctly!
General Types of Chemical Reactions
The following list introduces the general kinds of chemical reactions. Sections that follow describe each general type and its subtypes.
Composition (Synthesis)
Two or more simpler substances (elements or compounds) combine to form a more complex substance (a compound). The general form is:
A + X ----> AX
Decomposition
One substance breaks down, forming two or more simpler substances. This is the reverse of a composition (synthesis) reaction. The general form is:
AX ----> A + X
Replacement (Single Replacement)
One substance is replaced by a more reactive material. Either the cation (positive part) or the anion (negative part) undergoes replacement, but both do not undergo replacement at the same time. The general forms are:
A + BX ----> AX + B (cation replacement) Y + BX ----> BY + X (anion replacement)
The reason that this happens is that one element (substance) is more reactive (greater electronegativity) than another.
Ionic (Double Replacement)
In this type of reaction, there is no electron transfer, as there must be in single replacement for one substance to reach the free or uncombined state. Instead, substances dissolved or ionized in solution exchange anions (or cations, depending on your point of view). The products form in such a way that at least one leaves the reaction environment—the surroundings where the reaction takes place. Usually, a gas is evolved (given off), or an insoluble precipitate forms and cannot remain dissolved. These are also called exchange reactions.
1. Synthesis Reactions
Two Elements Forming a More Complex Substance
sodium + chlorine ----> sodium chloride 2Na + Cl2 ----> 2NaCl
Two Compounds Forming a More Complex Substance
hydrogen oxide + sulfur trioxide ----> hydrogen sulfate H2O + SO3 ----> H2SO4
Combinations of the above are possible. This would be like an element plus a compound forming a more complex compound. In general, there will be only one product to this type of reaction.
2. Decomposition Reactions
There are six types of decomposition reactions dealt with here:
Metallic Carbonates
Metallic carbonates yield metallic oxides plus carbon dioxide.
MCO3 ----> MO + CO2 (g)
Metallic Hydroxides
Many metallic hydroxides (most, but not all) form metallic oxides and water when heated.
MOH ----> MO + H2O [(l) or (g), depending on temperature]
Metallic Chlorates
Metallic chlorates form metallic chlorides and oxygen when heated.
MClO3 ----> MCl + O2 (g)
Acids
Acids formed by the reaction of nonmetallic oxides with water, and having hydrogen as their first element, decompose into nonmetallic oxides and water when heated.
HNmO ----> NmO + H2O [(l) or (g) depending on the temperature]
Oxides
Some oxides, when heated sufficiently, form simpler substances. For metallic oxides that undergo this reaction, the products are usually the metal and oxygen.
2MO ----> M + O2
Decomposition by Electricity
Electricity, by supplying electrons in a reaction, can cause decomposition.
electricity 2H2O ---------------> 2H2 (g) + O2 (g)
3. Single Replacement Reactions
There are four types of single replacement reactions, also called replacement or displacement reactions. These are always redox reactions. Redox reactions are discussed later in this handout.
Replacement of a Metal in a Compound by a More Active Metal
Remember the general rule? Activity increases over and up the Periodic Table.
Zn + CuSO4 ----> ZnSO4 + Cu
The Activity Series of the Elements lists the more active (or usual) metals involved in chemical reactions and the order in which they can replace one another in compounds. In this list, provided later in the handout, any metal will displace a metal below it from that less active metal’s compound. The further apart the metals are, the faster and more readily the reaction will take place.
Replacement of Hydrogen in Water by Metals
Any metal above hydrogen in the Activity Series will displace hydrogen from water, forming a new compound plus hydrogen gas.
M + H2O ----> MOH + H2 Ca + H2O ----> Ca(OH)2 + H2
Replacement of Hydrogen in Acids by Metals
Hydrogen may be replaced from acids (hydrogen, if it is the first element in a compound, is in a compound type called an acid) by metals above it in the Activity Series.
M + HX ----> MX + H2 Zn + HCl ----> ZnCl2 + H2
Replacement by Halogens
Group VIIA on the Periodic Table is also called the Halogen Family. “Halogen” means “salt-former.” These elements have similar properties because they have similar outer-shell arrangements: all elements in the same “A” column have the same number of electrons in the outer (highest) energy level. The higher in the column, the more reactive the halogen. Fluorine is the most active element and the most active halogen. A halogen may therefore be replaced from its compound by a halogen above it on the Periodic Table.
X2 + MX' ----> MX + X2' Cl2 + 2NaI ----> 2NaCl + I2
Reversal and Equilibrium
Many times, chemical reactions can be reversed, using the reverse process which formed the new products. That is, you can re-form the reactants. When this happens without any outside help, and all the products and reactants are still present in the same 'reaction environment', it happens until a condition known as equilibrium occurs. Equilibrium means the products are forming the reactants as fast as the reactants are forming the products.
4. Ionic Reactions
In ionic reactions, there is no electron exchange. Instead, the anions of the compounds 'exchange' (swap) and products are formed which leave the reaction environment.
AB (aq) + CD (aq) ----> AD + CB
One or both of the products AD or CB may be solid or gaseous or some combination. A specific example follows:
CaCl2 (aq) + 2AgNO3 (aq) ----> Ca(NO3)2 (aq) + 2AgCl (s)
When a solid forms, this type of reaction can be referred to as a precipitation reaction.
Reactions in which two compounds react to form two new compounds with no change in oxidation number are called metathesis reactions. If an element in any compound involved changes oxidation number, the reaction is referred to as an oxidation-reduction (redox) reaction. One element or compound serves as the reducing agent (loses electrons), and one serves as the oxidizing agent (gains electrons).
Metathesis Example
Pb(NO3)2 + K2CrO4 -----> PbCrO4 + 2KNO3
None of the involved elements change oxidation number.
Precipitation Example
AgNO3 (aq) + NaCl (aq) -----> AgCl (s) + NaNO3 (aq)
Both silver nitrate and sodium chloride are dissolved in water. They are mixed, with the precipitate silver chloride being formed and sodium nitrate remaining as the other reaction product. The sodium nitrate is dissolved in the water.
Oxidation-Reduction (Redox) Example
SnCl2 (aq) + 2FeCl3 (aq)-----> SnCl4 (aq) + 2FeCl2 (aq)
The reactants tin(II) chloride and iron(III) chloride undergo changes in oxidation number on their respective metal ions. Tin(II) becomes tin(IV) on the product side, indicating that it has lost electrons. It is therefore called the reducing agent—the one responsible for reducing the charge on another ion. Iron(III) changes from 3+ on the reactant side to 2+ (iron(II)) on the product side. It has been reduced in oxidation number and is called the oxidizing agent—the one responsible for causing another ion to increase in charge.
Disproportionation Example
3NO2 (g) + H2O (l)-----> 2HNO3 (l) + NO (g)
Nitrogen dioxide, nitric acid (HNO3), and nitrogen monoxide all contain nitrogen. Nitrogen changes in oxidation number from 4+ in nitrogen dioxide to 5+ in nitric acid and 2+ in NO. Nitrogen dioxide is both reduced and oxidized; it is both the reducing and oxidizing agent.
Other Reaction Types and Categories
Reversible Reactions
In these reactions, the reactants form the product. At some point, the product begins to decompose back into the reactants. This may or may not happen at equilibrium.
Reactions of Hydrogen
Hydrogen forms two types of hydrides: binary compounds of hydrogen and another element.
Ionic hydrides: Hydrogen assumes a 1− oxidation number, generally in combination with active metals of Groups IA and IIA.
Li + H2 (g) -----> 2LiH
Covalent hydrides: Hydrogen assumes a 1+ oxidation number in a binary combination with a nonmetal. In combinations with elements in column VIIA, the compounds are called hydrogen halides.
Covalent hydride example:
2H2 + O2 -----> 2H2O
Hydrogen halide example:
H2 + F2 -----> 2HF
Many of the covalent hydrides are acidic.
Reactions of Oxygen: Peroxides and Superoxides
Oxygen reacts with metals of Group IA to produce metal oxides, peroxides, or superoxides. It can react with lithium to form an oxide, with sodium to form peroxide (in the presence of excess oxygen) and with the heavier members of Group IA to form superoxides. In oxides the oxidation number of oxygen is 2-, in peroxides two oxygen atoms are joined, sharing 2 gained electrons for an overall 2- charge, and in superoxides two oxygen atoms are joined with an overall 1- charge (which corresponds to a charge of -1/2 on each atom of oxygen involved).
Oxide formation:
2Li (s) + O2 (g) -----> 2Li2O
Peroxide formation:
2Na (s) + O2 (g) -----> Na2O2 (g)
Superoxide formation:
K (s) + O2 (g) -----> KO2 (s)
Formation of Metal Oxides
Oxygen reacts with metals (other than those described above) to form oxides in which the oxidation number of oxygen is 2-.
4Fe (s) + 3O2 (g) -----> 2Fe2O3 (s)
Metal Oxides and Water
Metal oxides react with water to form metal hydroxides. Metal oxides are sometimes called basic anhydrides for this reason: hydroxides are bases, and when water is removed from their chemical structure, they are “anhydrides” (without water).
ZnO (s) + H2O (l) -----> Zn(OH)2 (aq)
Nonmetals and Oxygen
Many nonmetals react with oxygen to form nonmetal oxides. These are covalent compounds.
2S (s) + 3O2 (g) -----> 2SO3 (g)
Nonmetal Oxides and Water
Nonmetal oxides react with water to form acids. They are often called acidic anhydrides for reasons analogous to those for basic anhydrides.
SO3 (g) + H2O (l) -----> H2SO4 (l)
Metal Oxides and Nonmetal Oxides
Metal oxides and nonmetal oxides react to form salts. This occurs with no change in oxidation number for any involved element.
CO2 (g) + CaO (s) -----> CaCO3 (s)
Combustion
Combustion reactions involve the use of oxygen to oxidize materials, so these are also redox reactions. Familiar examples include the burning of wood and fossil fuels (hydrocarbons).
CH4 (g) + 2O2 (g) -----> CO2 (g) + 2H2O(l)
Activity Series of the Elements
Activity decreases down each list.
| Metals | Nonmetals |
|---|---|
| lithium | fluorine |
| potassium | chlorine |
| calcium | bromine |
| sodium | iodine |
| magnesium | |
| aluminum | |
| zinc | |
| chromium | |
| iron | |
| nickel | |
| tin | |
| lead | |
| HYDROGEN | |
| copper | |
| mercury | |
| silver | |
| platinum | |
| gold |
Rules Regarding the Activity Series
- Each element in the list displaces from a compound any of the elements below it. The larger the interval between elements in the series, the more vigorous the action.
- All metals above hydrogen displace hydrogen from hydrochloric acid (HCl) or dilute sulfuric acid (H2SO4).
- Metals above magnesium vigorously displace hydrogen from water. Magnesium displaces hydrogen from steam.
- Metals above silver combine directly with oxygen; those near the top do so rapidly.
- Metals below mercury form oxides only indirectly.
- Oxides of metals below mercury decompose with mild heating.
- Oxides of metals below chromium easily undergo reduction to metals by heating with hydrogen.
- Oxides of metals above iron resist reduction by heating with hydrogen.
- Elements near the top of the series are never found free in nature.
- Elements near the bottom of the list are often found free in nature.
Teachers.Net · https://teachers.net/lessons/361.html