Investigating Forces Mini-labs
- Science
- Middle

- Activity Time
- Materials
- Concepts / Topics
Students rotate through six stations, investigate different forces with classroom materials, and record observations and answers in their notebooks.
Overview and Setup
This activity was designed for a science classroom with virtually no lab facilities and a very tight budget. I set the labs up on the weekend and allow half an hour to forty minutes each day during the week for students to run their investigations. This allows for review and closure time at the end of the period.
Students are put into six groups, and each group rotates to a different table (lab). For ease of facilitating the labs, all supplies and materials are placed in boxes that students retrieve from the supply area at the beginning of the period and return at the end of the period.
The labs cover buoyant forces, magnetic force, electrical force (static), gravitational force, elastic force, and frictional force.
Students need to be able to identify:
- AGENT: The object that is having a noticeable effect on another object.
- RECEIVER: The object getting the force.
- EFFECT: The effect of the force, or what happens when the agent acts on the receiver.
Each lab has a Lab Sheet that gives the materials needed, directions for completing the investigation, and questions for students to answer.
Station #1
Materials
- Bucket of water
- Beaker or cup
What to Do
- Push the empty beaker or cup slowly into the bucket of water. Keep the open end of the beaker or cup facing up.
- Then, submerge the beaker or cup. Let the water fill the beaker or cup.
- Remove the beaker or cup from the water.
In Your Notebook
Label as Station #1.
- Identify the agent.
- Identify the receiver.
- Identify the effect.
- What forces did you feel at each step?
- Which type of force does this station demonstrate?
Station #2
Materials
- Paper
- Beaker or cup
- 5 paper clips
- Magnet
What to Do
- Place the paper clips on the paper and place the beaker or cup upside down on top of the paper clips.
- Bring the magnet near the beaker or cup until you can attract one or more clips. If one person does not succeed, allow others to try or brainstorm different ways to do this.
- Try to lift the paper clip(s) to the top of the beaker or cup.
- Keep holding the clips at the top of the cup, then have someone lift the cup off the paper.
In Your Notebook
- Identify the agent.
- Identify the receiver.
- Identify the effect.
- What type of force(s) does this station demonstrate?
Station #3
Materials
- Plastic bag
- Wool sock
- Scissors
- Ruler
What to Do
- Cut two one-inch-wide strips from the bag. The strips need to be at least 12 inches long.
- With one hand, hold up the strips. Observe them as they hang.
- Now rub the wool sock on both sides of the strips. Allow the strips to hang freely again. Observe any forces at work.
- Bring one of the strips near the table. Observe what happens.
- Throw your strips in the trash when you are done.
In Your Notebook
- Identify the agent.
- Identify the receiver.
- Identify the effect.
- What happened at steps 3 and 4?
- What type of force(s) does this station demonstrate?
Station #4
Materials
- Sheets of paper
What to Do
- One at a time, drop a piece of flat paper, a paper folded into fourths, and a paper that has been crumpled into a ball.
- Drop any two at a time from the same height.
- Drop all three at a time from the same height.
In Your Notebook
- Identify the agent.
- Identify the receiver.
- Identify the effect.
- Which paper fell the slowest? Why?
- What type of forces does this station demonstrate?
Station #5
Materials
- 3 textbooks
- Ramp (board or thin book)
- Bottle or cylinder
- Newspaper
- Towel
What to Do
Do this on the floor.
- Set up a ramp that is the height of three books.
- Place the newspaper under the lower end of the ramp so that it extends beyond the ramp.
- Roll the bottle or cylinder down the ramp. Measure how far it goes.
- Repeat the demonstration, except place the towel under the ramp instead of the newspaper.
In Your Notebook
- Identify the agent.
- Identify the receiver.
- Identify the effect.
- Record and label the measurements.
- What type of force(s) did this station demonstrate?
Station #6
Materials
- Rubber band
- Book with string around it
- Book without string around it
- Paper clip
- Meter stick
What to Do
- Attach the rubber band to the paper clip.
- Attach the paper clip to the string around the book.
- Place the book on the table so that, when stretched, the end of the rubber band is off the edge of the table.
- Slowly pull the end of the rubber band until the book starts to move. Be sure to keep the rubber band level with the book.
- Measure, in cm, the length of the rubber band when the book began to move.
- Place another book on top of the book with the string and repeat steps 3, 4, and 5.
In Your Notebook
- Identify the agent.
- Identify the receiver.
- Identify the effect.
- Record and label the measurements for both demonstrations.
- What type of force(s) did this station demonstrate?
Teacher Note
If Newton’s Laws or other related concepts have been previously introduced, you may wish to ask students to identify those also.
Teachers.Net · https://teachers.net/lessons/653.html