Endothermic/Exothermic Lab
- Science
- Senior

- Activity Time
- Materials
- Concepts / Topics
Learners measure starting and changing temperatures while carrying out two reactions, then record observations and answer questions about reaction type and heat flow.
Endothermic/Exothermic Lab
Period: ____________________ Names: ____________________
Procedure I
- Obtain a large test tube. Carefully measure 5 mL of 6 M HCl acid into the test tube.
- Place a thermometer into the acid and put the test tube with the thermometer into the test tube rack. Take the initial temperature reading and record it below.
- Remove the thermometer, carefully place a piece of zinc (Zn) in the test tube with the acid, and replace the thermometer.
- Observe the reaction and answer the questions below. Watch the thermometer closely and record the highest temperature obtained during the reaction as the final temperature.
- When the reaction is complete, discard the reaction products in the beaker on the counter. Thoroughly clean the test tube using the test tube brush, and clean the thermometer.
Initial temperature: __________ °C
Final temperature: __________ °C
Questions
- What type of reaction is this?
- Was there a gas given off? A smell?
- Describe the reaction.
- How much (°C) heat flow?
Procedure II
- Measure out 3.0 g of Ba(OH)2·8H2O, remembering to use a piece of paper on the balance, and place it into the dry test tube.
- Place the dry thermometer into the compound and take the initial temperature reading. Remove the thermometer, returning any compound stuck to it to the test tube.
- Measure out 1.0 g of NH4Cl and place it into the test tube. Place a #2 stopper over the mouth of the tube and shake vigorously for 60 seconds.
- Observe the reaction and answer the questions below. Remove the stopper, place the thermometer into the test tube, and record the lowest temperature obtained during the reaction as the final temperature.
- When the reaction is complete, discard the reaction products into the sink with lots of water. Thoroughly clean the test tube using the test tube brush, and clean the thermometer.
Initial temperature: __________ °C
Final temperature: __________ °C
Questions
- What type of reaction is this?
- Was there a gas given off? A smell?
- Describe the reaction.
- How much (°C) heat flow?
Teachers.Net · https://teachers.net/lessons/213.html